OME International Catalogue

DEFENDER & COUNTY 110 BP-51 LONG TRAVEL (EXCLUDES PUMA MODELS) GLOBAL FRONT SELECTION Part Number Qty Unit Price Notes Spring 3062 1 1 BP-51 Shock BP5160035 2 2 BP-51 Fit Kit VM80010036 1 Spring 3063 1 1 BP-51 Shock BP5160045 2 2 BP-51 Fit Kit VM80010036 1 FIT KITS & HARDWARE Loc Part Number Qty Unit Price Note F OMESD32 CALR1 CALR2 F OMELRCP1 EA 4 REAR SELECTION Part Number Qty Unit Price Note Spring 3064 1 1,2,5 BP-51 Shock BP5160036 2 2 BP-51 Fit Kit VM80010037 1 Spring 3065 1 1,2 BP-51 Shock BP5160036 2 2 BP-51 Fit Kit VM80010037 1 Spring 3066 1 1,2 BP-51 Shock BP5160036 2 2 BP-51 Fit Kit VM80010037 1 FIT KITS & HARDWARE Loc Part Number Qty Unit Price Note R OMELRCP3 EA 4 R OMESB0068 R OMESB0069 3 LAND ROVER Description BUSH KIT T/ARM OFFSET 16MM 6 BUSH KIT T/ARM OFFSET 20MM 1 Description COIL PACKER 2.5L DIESEL ENGINE Est Lift 50mm No Bar Bar/ Winch/ Accessories ALL MODELS Estimated Lift 50mm Medium Load Constant 300kg Constant 500kg COIL PACKER STEERING DAMPER 1 F CASTER KIT Comments Caution: Front driveshaft MUST be replaced / modified with Double Cardan Joints and checked for Uni bind with BP-51 shocks installed at droop. 1 When fitting coil springs it is mandatory to use BP-51 shock absorbers to achieve minimum down travel requirement. 2 When fitting BP-51 shock absorbers the following are mandatory requirements: * Fit longer coils 3062-3066 for springs to remain trapped with shocks fully extended * Remove any inner helper coils already fitted 3 Caster Kit will increase caster angle by 2 degrees. Check manufacturer's specifications to determine if Caster Kit is required. CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms. 4 8mm Steel Coil Seat Packer, refer to selection chart supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. 5 Important: 3064 has reduced spring rate from OE to provide improved ride quality for light loads. OE springs are designated as medium load springs. 6 Trailing Arm Bush is an optional fit. Bush kit is offset and accommodates for the increased angle of the trailing arm due to longer travel. 101 OME INT CAT. NO.50 OCTOBER 2022