+ OME APPLICATION CATALOGUE 61 JANUARY 2025

LANDCRUISER 200 SERIES WAGON (Not AHC Models) FRONT SELECTION Part Number Qty Notes Spring 4008 1 1 Strut *93005 / 93017 2 1,2,6 Spring 4008 1 1 Strut MT64901019 Strut *MT64901020 Spring 4010 1 1 Strut *93005 / 93017 2 1,2,6 Spring 4010 1 1 Strut MT64901019 Strut *MT64901020 Coilover LH BP5190003L 1 Coilover RH BP5190003R 1,2 Fit Kit VM80010003 1 1,2 FIT KITS & HARDWARE Loc Part Number Qty Note F UCA0001 1 5 F OME3125 2 2 F OMETH003 2 3 F FAU2001870 1 4 SERVICE PARTS Loc Part Number Qty Note F OME UCA Eye Bush 2pk UCASP001 1 F OME UCA Ball Joint 1pk UCASP002 EA F OME UCA Boot 2pk UCASP003 1 Description Description UPPER CONTROL ARM UPPER STRUT BUSHES STRUT TOP HAT KIT FRONT AXLE UPGRADE LABEL KIT 25mm MT64 2 1,2,6 50mm BP-51 1+1 50mm MT64 2 1,2,6 25mm Nitro + TOYOTA GLOBAL V8 DIESEL ENGINE 50mm Nitro + Selection Hints For fitment to Models with Toyota's KDSS (Kinetic Dynamic Suspension System) fitted, please refer to OME's Fitting Hints & Tips (OME Bulletin 70 LC200 KDSS Fitting Hints). Comments 1 OME coils and struts can only be installed together due to different winding of the lower coil end to suit the OME coil seat. They are not compatible with the OE coil seat. Due to the nature of the KDSS, Models fitted with KDSS may experience a characteristic 10mm to 15mm lean to the front right hand side. 2 No top mounting bushes supplied, use OME3125. OE bushes may be re-used if in good condition 3 Strut Top Hat Kit may be required if original equipment is worn. 4 Australia Only. Full OME suspension system must be fitted. 5 The OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm lift). Please note after fitment of Upper Control Arm a vehicle wheel alignment will be required. 6 Does not suit OE coil. Page 188