OME CATALOGUE 54 AUGUST 2023 (Nr. 54)

LANDCRUISER 100 SERIES INDEPENDENT FRONT SUSPENSION **DOES NOT SUIT AHC MODELS** FRONT SELECTION Part Number Qty Note 303001 303002 Shock - N/Sport *60001 / 60000 Shock - N/Plus *63001 / 63000 FIT KITS & HARDWARE Loc Part Number Qty Note F UCA0010 F FK27 5 REAR SELECTION Part Number Qty Note Spring 2860 1 Shock - N/Sport 60002 2 Shock - N/Plus 63002 Spring 2863 1 Shock - N/Sport *60003 / 60002 Shock - N/Plus *63003 / 63002 Spring 2864 1 Shock - N/Sport 60003 Shock - N/Plus 63003 Spring 2866 Spring 2862 Shock - N/Sport 60002 Shock - N/Plus 63002 REAR SELECTION Part Number Qty Note Spring 2865 1 Shock - N/Sport 60002 2 Shock - N/Plus 63002 Spring 2866 1 Shock - N/Sport *60003 / 60002 Shock - N/Plus *63003 / 63002 FIT KITS & HARDWARE Loc Part Number Qty Note OME80PR05 OME80PR10 OME661 OME662 UPPER CONTROL ARM TOYOTA DOMESTIC (AUS) 1 2 2 TRIM PACKER EA 2 Constant 400kg 2 Est Lift 40mm R Description 3 2 2 4 1 1 R Medium Load ALL MODELS 10/2000 ON Bar/ Winch/ Accessories PETROL & DIESEL MODELS Constant 200kg 1 Estimated Lift 10mm Medium Load ALL MODELS 10/98 TO 09/2000 2 2 1 Description FITTING KIT STONE GUARD KIT REAR RAKE Constant 200kg Torsion Bars Medium Load Comments 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. It is important that a minimum of 60mm of droop is maintained to prevent topping out of the front shock absorbers. 303001 suits V8 Models, 303002 suits Turbo Diesel Models. 2 Packers must be installed on top of coils. 3 SPORT/NITROCHARGER FITMENT: OME661 or OME662 (suits 40mm diameter control arms) Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 4 Original rear rake is 60mm approximately with OE coil rates of 145lbs/in or 25.5N/mm. Customers wishing to lower the rear height but increase the load carrying ability can select from: 2866 - Reduces OE height by 10mm (rates 240 - 300lbs/in, 42 - 52.5N/mm) 2862 - Reduces OE height by 30mm (rates 240lbs/in, 42N/mm) 5 Due to the common problem of the lower control arm cracking when driven under hard conditions, the fitment of a FK27 Lower Control Arm Reinforcing Bracket Kit is strongly recommended. Page 195