OME International Catalogue

LANDCRUISER 100 SERIES - INDEPENDENT FRONT SUSPENSION ** DOES NOT SUIT AHC MODELS** FRONT SELECTION 6 Part Number Qty Unit Price Note 303001 303002 Shock - N/Sport *60001 / 60000 FIT KITS & HARDWARE Loc Part Number Qty Unit Price Note F FK27 1 5 REAR SELECTION 6 Part Number Qty Unit Price Note Spring 2860 1 Shock - N/Sport 60002 2 2 Spring 2863 1 Shock - N/Sport *60003 / 60002 2 Spring 2864 1 Shock - N/Sport 60003 2 Spring 2866 Spring 2862 Shock - N/Sport 60002 2 REAR SELECTION Part Number Qty Unit Price Note Spring 2865 1 Shock - N/Sport 60002 2 2 Spring 2866 1 Shock - N/Sport *60003 / 60002 2 FIT KITS & HARDWARE Loc Part Number Qty Unit Price Note OME80PR05 OME80PR10 OME661 OME662 DOMESTIC (AUS) R Medium Load Constant 200kg ALL MODELS 10/2000 ON Estimated Lift 10mm R 1 4 1 Bar/ Winch/ Accessories REAR RAKE Medium Load Constant 400kg Constant 200kg 2 Description TRIM PACKER EA ALL MODELS 10/98 TO 09/2000 Est Lift 40mm Medium Load Description FITTING KIT STONE GUARD KIT 1 PETROL & DIESEL MODELS Torsion Bars 3 1 TOYOTA Comments 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. It is important that a minimum of 60mm of droop is maintained to prevent topping out of the front shock absorbers. 303001 suits V8 Models, 303002 suits Turbo Diesel Models. 2 Packers must be installed on top of coils. 3 SPORT/NITROCHARGER FITMENT: OME661 or OME662 (suits 40mm diameter control arms) Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 4 Original rear rake is 60mm approximately with OE coil rates of 145lbs/in or 25.5N/mm. Customers wishing to lower the rear height but increase the load carrying ability can select from: 2866 - Reduces OE height by 10mm (rates 240 - 300lbs/in, 42 - 52.5N/mm) 2862 - Reduces OE height by 30mm (rates 240lbs/in, 42N/mm) 5 Due to the common problem of the lower control arm cracking when driven under hard conditions, the fitment of a FK27 Lower Control Arm Reinforcing Bracket Kit is strongly recommended. 6 When remaining stock of N101 and N133 is exhausted no further product will be available. 145 OME INT CAT. NO.50 OCTOBER 2022