++ ARB APRIL 2021

TOYOTA HILUX REVO 2015 to 2020 (GUN126) Toyota updated the design of the Hilux around mid 2018. If unsure what part to order please contact ARB Tech for assistance. Models with factory metal bumper are incompatible with bars. SMARTBAR SPARTAN & STEALTH BARS cont NOTES 1 Suits OE fog lights 13 . 2 At time of publication fitment to vehicles with TRD Accessory Pack is unconfirmed. 4 4x4 Narrow Body SR 9/15 On and Workmate To 07/18 only available as single cab. 5 At time of publication fitment to non High-Rider Narrow Body 4x2 Workmate and 4x4 Workmate/SR 15 On is unconfirmed. 6 DRL supplied as standard on SmartBar for SR5 and Rogue models. 7 09/15 To 07/18 SR High Rider (Wide Body) is Double-Cab Turbo Diesel. 8 Bumper trim is required for pre 08/18 Wide Body High-Rider 4x2 SR/SR5/WorkMate Models & Non High-Rider 4x4 SR/SR5/WorkMate Models. Bumper trim is also required on post 08/18 WorkMate Models. Other post 08/18 models require grille trimming. 13 At time of publication LED fog light compatability on 08/18 On SR5 and Rogue Models is unconfirmed. Compatible with hologen fog lights. 16 Suits Warn XD9000 & Zeon 10,000 low mount winches 17 . 17 Winches with synthetic rope may require (3500600) Hawse Fairlead Spacer Kit or alternative Hawse due to Hawse design. See Winch Installation Kits located in the Warn & Magnum/Bushranger Electric Winches section below. 20 At time of publication fitment to Narrow Body SR 8/18 On is unconfirmed. 21 Suits Warn Zeon 25 8/8-S/10/10-S/Platinum 10/10-S, Magnum 8lb/10lb, Bushranger DV-9TH/DS-9.5TH/SEAL9.5TH/Revo 10lb, Smittybilt X20 10lb winches. 17,22,23,24 (Warn ZEON Platinum fitment may require part no. W94288 Enhanced Signal Kit) 22 (3500630) Flip Up Number Plate Bracket is recommended for winch bars standard size number plates. 23 Accessory bracket supplied mounts to the bar in front of the grille where winch control box can be fitted on the bracket between spotlights. 24 Where winch control box is fitted to the Driving Light Mouint Bracket, the variety of light choices will be restricted and will not facilitate the fitment of any light bar options. 25 Additional fitting kits and relocation kits are required see Winch Installation Kits located in the Warn & Magnum/Bushranger Winches section below. 26 Rectangular IPF lights not compatable where antenna/sand flag bracket is fitted. 27 In addition to the lighting options listed in the ARB and IPF 26 sections below, other options include, Bushranger Night Hawk NHP180S 180mm round LED/NHP180F 48W LED flood beam/NHS055-NHS245 5.5 inch to 20.5 inch light bars, IPF800/900/900 Xtreme LED sports/868/968 series and 930 Super Rallylights. 24 For Confirmation of Fitment to Vehicle and ordering Contact [email protected] WARN & MAGNUM / BUSHRANGER / SMITTYBILT ELECTRIC WINCHES WINCH INSTALLATION KITS (3500600) Hawse Fairlead Spacer Kit (3501000) Winch Install Kit Summit Bar (3500770) Bracket Solenoid Pack For Smittybilt Gen 2 X20 10,000lb Winch (98510) (3500610) Zeon Wire Rope Fit Kit (3500620) Zeon Synthetic Rope Fit Kit 1 ARB recommend fitment at time of bar installation. Fitment post bar installation will incur additional labour charges. UNDER VEHICLE PROTECTION (5414200) HiLux 15 On, UVP Panel, Grey Textured Powder Coat Finish ARB RECOVERY POINTS 1,2,3 (2814020) LHS Recovery Point, Suits 2015 On, 8000kg Rating, Reco. Shackle Rating 4.75t 1,2,3 (2814030) RHS Recovery Point, Suits 2015 On, 8000kg Rating, Reco. Shackle Rating 4.75t 3 Confirmed suitability to OE Bumper and ARB bars only. ARB CANOPIES Note: Canopy Prefix CL = Lift Up Front Window ASCENT CANOPY DUAL CAB A DECK MODELS 10/2015 ON - SMOOTH EXTERIOR 1 MUST BE COLOUR CODED (AC06A, CC15) Pop-Out Tinted Windows Both Sides (AC06B, CC15) LHS Lift Up, RHS Pop-Out Tinted Windows (AC06C, CC15) Lift Up Tinted Windows Both Sides 2 ASCENT CANOPY DUAL CAB J DECK MODELS 10/2015 ON - SMOOTH EXTERIOR 1 MUST BE COLOUR CODED (AC10A, CC15) Pop-Out Tinted Windows Both Sides (AC10B, CC15) LHS Lift Up, RHS Pop-Out Tinted Windows (AC10C, CC15) Lift Up Tinted Windows Both Sides